Anyone know any thing more about this page 143 of the 2022 owner manual it talks about the ideal up feature. (Remember that ignition does not mean starting the engine). After 5 seconds, turn on the ignition, immediately turn it off, turn it on again, turn it off and on again. To cancel the Idle–Up feature, either push the CANCEL button, push the On/Off button, or press the brake pedal.” Dodge Ram In order to read the error code, the following procedure must be performed: Turn the ignition off. To decrease the RPM, push and hold the SET (-) button and the idle speed will decrease to approximately 1,100 RPM.ģ. To increase the RPM, push and hold the RES (+) button and the idle speed will increase to approximately 1,500 RPM. With the transmission in PARK, the parking brake applied, and the engine running, push the On/Off button to the ON position, then push the SET (-) button.Ģ. Stop driving immediately and let your transmission cool down. The Idle-Up feature uses the Cruise Control buttons to increase engine idle speed and quickly warm the vehicle's interior.ġ. Unlike oil, transmission fluid does not burn off so if you are overheating there is most. Idling time of about 3-5 minutes is all that is required to properly cool. Extended periods of idle time should be avoided. Fuel contamination of lube oil is higher at idle. It is standard equipment on 6.4L and 6.7L engines. “The driver-controlled high idle speed feature will help increase cylinder temperatures and provide additional cab heat, however, excessive idling may still cause the exhaust aftertreatment system to not properly regenerate. alternator output, provide increased speed to power and aftermarket installed belt or PTO driven device or other customer need for higher than idle speed RPM. On page 143 of the 2022 owner manual it talks about the ideal up feature.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |